2025 RAM 5500 Brutus Truck Body and Fassi Crane 

in Red Deer 

Brutus Body Features

Body length  141 + 7 step bumper
Body width  97 + rub rails
Cabinet height  60
Cabinet depth  24
Cabinet drop  None
Front cabinets  1/8 aluminum
Rear cabinets  12 gauge steel
Cabinet main sills  4 aluminum channel
Deck main sills  5 x 3 steel tubes with 3/8 walls
Cabinet cross sills  3 aluminum channel
Deck cross sills  3 channel on 16 centers
Cargo bay floor  3/16 aluminum diamond plate
Flooring  2 x 6 wood decking
Rub rails  3 flat bar 2 ½ from deck with 4 pockets per side
Doors  3/16 aluminum
Shelving  1/8 aluminum
Hinges  Polished stainless steel
Handles  Polished stainless steel
Latching  3-point stainless steel
Door retainers  Gas shocks
Cabinet venting  Bottom venturi's with drain holes to remove moisture build-up
Door seals  Rubber bulb seals that are glued into a u-shaped moulding
Drip mouldings  Glue bonded aluminum gutters that channel water away from the doors
Interior cabinet lights  LED strip with master switch
Exterior work lights  Ecco EW2530 3,750 lumens LED with master switch
Running Lights  Rubber mounted LED's
Warranty  3-year structural, 3-year limited powder
Paint protection -Aluminum diamond plate glue bonded to the main cabinet fronts with
45 degree angled sides and to the front of the rear under deck cabinets
Body finish  Fully body worked for a smooth exterior with no seams or weld joints

Brutus Body Specifications

Driver side cabinet #1: 60H x 28L x 24D
1-Vertical aluminum door with gas shock
1-Brutus aluminum tool cabinet with 1-7, 3-5, 3-3 deep drawers and top shelf. Each
removable drawer has 300 lb roller bearing sliders, stainless locking handle, slam
latches with wear plates, and 4 adjustable dividers (22 wide)
1-Stainless flatbar with 8 stainless hooks and rubber wall protection (upper front wall)
1-Stainless flatbar with 8 stainless hooks and rubber wall protection (upper rear wall)
1-LED perimeter strip lighting
1-Ecco EW2530 3,750 lumens LED work light mounted to the rear rooftop corner

Driver side cabinet #2: 16H x 24L x 16D
-Under deck steel cabinet

Passenger side cabinet #1: 60H x 28L x 24D
1-Vertical aluminum door with gas shock
2-Aluminum adjustable shelves (lower cabinet)
1-Stainless flatbar with 8 stainless hooks and rubber wall protection (upper front wall)
1-Stainless flatbar with 8 stainless hooks and rubber wall protection (upper back wall)
1-Stainless flatbar with 8 stainless hooks and rubber wall protection (upper rear wall)
1-LED perimeter strip lighting
1-Ecco EW2530 3,750 lumens LED work light mounted to the rear rooftop corner

Passenger side cabinet #2: 16H x 24L x 16D
-Under deck steel cabinet

Cargo bay: 39H x 28L x 49W
1-Front wall with square water jet cut holes
1-Front rooftop rack with 8 pipe ears
1-Spare tire holder above cab mount
4-Pairs rubberized tool holders (driver side wall)
4-Gear hooks (upper passenger side wall)
1-12H x 49W removable aluminum diamond plate gate with side rails

Driver side of deck
1-Recessed stainless fuel filler cup with drain
1-Rubrail with four vertical pockets and conspicuity tape
1-Black mud flap with aluminum diamond plate mount at front of deck with anti-sail
bracket
1-Brutus mud flap at rear cabinet

Passenger side of deck
1-Rubrail with four vertical pockets and conspicuity tape
1-Black mud flap with aluminum diamond plate mount at front of deck with anti-sail
bracket
1-Brutus mud flap at rear cabinet



Main deck: 80L x 97W
1-27H x 97W smooth steel crane guard with angled top corners, square water jet cut
visibility holes, and 4 pipe rack holders
2-Aluminum removable racks with 8 pipe ears
2-Rigid D-Series Pro 3000 lumen LED work lights mounted to the top corners of the
crane guard
2-Aluminum chain racks with locking covers mounted to the top of the crane guard above
the deck chain boxes
2-Chain boxes with drain holes recessed into deck
1-Flip-over hitch box with Binkley 5th wheel hitch
1-Steel diamond plate in center of deck from rear of deck to hitch box
2-Vise pocket top of deck at rear of deck each corner

Misc. features
2-Next Hydraulics 16 x 16 poly crane pads with angled aluminum diamond plate
holders (mounted to the mud flap plates on the front of the rear deck)
1-7 expanded steel step bumper with center V-notch
2-Rear light boxes each with a red, red, clear angled oblong LED light with chrome bezel
1-License plate bracket with LED light
1-2 Frame mounted receiver hitch with Carr aluminum folding step
1-7 prong plug (rear deck skirt above bumper)
1-Rear backup alarm
1-Flared aluminum diamond plate running boards for a crew cab
1-National Safety Mark decaled installation

Crane system options
1-Fassi F85B.0.24 (Red)
Lifting moment: 7.5 tonne/metre
Lift capacity: 53,090 ft. lbs
Rotation torque: 8,632 ft. lbs
Capacities: 7,826 lb @ 6' 6 to 1,135 lb @ 35' 11
Weight: 2,579 lb
Rotation: 370 degrees
Oil tank capacity: 16 gallons
Pump capacity: 5 gpm
Working pressure: 4,350 psi
Controls: Dual crossover

Crane comes with:
1-PTO for automatic transmission
1-High pressure gear pump
1-Steel sub frame with steel side plates bolted to chassis frame and plug welded to
body sub frame
4-Steel tube side plate mounts which each bolt to side plates with 8 grade eight bolts
*33 gap for the crane and pipe racks


TRUCK FEATURES
»» 6.7L Cummins Turbo Diesel for maximum torque
»» 4-wheel drive for superior off-road capability
»» Heavy-duty chassis for commercial-grade durability
»» High towing and payload capacity for tough jobs

ADVANCED SAFETY FEATURES
»» Four-wheel anti-lock disc brakes for secure stops
»» Electronic stability control for confident handling
»» Advanced airbag system for added protection
»» Traction control for optimal grip in all conditions

PERFORMANCE AND EFFICIENCY
»» 8-speed TorqueFlite HD automatic transmission
»» Turbocharged diesel engine for impressive pulling power
»» Efficient power delivery for heavy-duty applications
»» Robust suspension for smooth, stable rides



This 2025 RAM 5500 Tradesman's VIN is: 3C7WRNFL4SG564153.